Poster PDFS 2020 Virtual Convention
STUDENT POSTERS IN THE STUDENT POSTER COMPETITION
”Understanding the Thermodiffusion Properties of Ionic Liquids in a Cellulosic Medium”
Júlio Amando de Barros, University of Sao Paulo, Brazil
”Characterization of Spruce Log Soaking Water and their Antifungal and Wood Preserving Properties”
Aitor Barbero-López, University of Eastern Finland, Finland
”Hardwood Cutting Forces at Different Speeds up to 80 m/s for an Evaluated Real Chip Thickness”
Ondrej Dvoracek, Wood K Plus, Austria
”Simultaneous Chemical and Topographical Mapping of Wood Ultrastructures by Chemical Force Microscopy”
Claudia Gusenbauer, BOKU – University of Natural Resources and Life Sciences, Vienna, Austria
“The Importance of Cold Tack of Urea Formaldehyde in Plywood Production”
Elfriede Hogger, Wood K Plus, Austria
“Sustainable Development – International Framework – Overview and Analysis in the Context of Forests and Forest Products with Competitiveness and New Opportunities”
Annika Hyytiä, University of Helsinki, Finland
“Triboelectric Activation of Wood Surfaces by Mechanical Friction”
Lena Maria Leiter, BOKU – University of Natural Resources and Life Sciences, Vienna, Austria
“Structural, Chemical, and Multi-scale Mechanical Characterization of Waste Windmill Palm Fiber
(Trachycarpus fortunei)”
Jing Li, Chinese Academy of Forestry, China
“Differences Between Hygroscopicity Limit and Cell Wall Saturation Investigated by LF-NMR on Thermally-modified and Lignin-removed Southern Pine (Pinus spp.)”
Jingyu Li, Beijing Forestry University, China
“Preparation of Kenaf-based Nanobiocomposite as Sustainable Adsorbent for the Removal of Organic and Inorganic and Pathogenic Contaminants”
Sujata Mandal, University of North Texas, United States
”Bioinspired Wood Protection – Evaluation of Wood Treated with Biofinish”
Faksawat Poohphajai, InnoRenew CoE, Slovenia
“ABES and DMA Cure Monitoring of Tannin Adhesive”
Jaša Saražin, University of Ljubljana, Slovenia
“Highly Anisotropic Wood-Based Composite with Layered Structure for Thermal and Electrical Conduction”
Hao Sun, Northeast Forestry University, China
“Low Temperature Adhesive Bonding for Structural Wood Materials”
Anita Tran, BOKU – University of Natural Resources and Life Sciences, Vienna, Austria
“The Vibrational Properties of Catalpa Ovata Wood for the Back Plate of the Guqin”
Yi-Hsuan Tsai, National Taiwan University, Taiwan
“Effects of Wood Decay on the Deformation Mechanism and Shear Performance of Screwed and Nailed Joints”
Rintato Ueda, Hokkaido University, Japan
”Adding Value to Timber Components through Consideration of Demolition and Disassembly”
St. John Walsh, University College Dublin, Ireland
“Preparation of Cellulose Acetate-Polyacrylonitrile Composite Nanofibers by Multi-fluid Mixing Electrospinning Method: Morphology, Wettability, and Mechanical Properties”
Dong Wang, Northeast Forestry University, China
“Analysis of VOCs and Odor-active Compounds from Veneered Particleboard Coated with Water-based Lacquer”
Qifan Wang, Northeast Forestry University, China
“Effect of Lacquer Decoration on VOCs and Odor Release from P.neurantha (Hemsl.) Gamble”
Bin Zeng, Northeast Forestry University, China
OTHER POSTERS
”Properties of Particleboard Made from Recycled Polystyrene and Cocos Nucifera Stem Particles”
Babatunde Ajayi, Federal University of Technology Akure, Nigeria
”Heterospecific Tree Density and Environmental Factors affect Afzelia africana Sm. Population Structure in the Pendjari Biosphere Reserve, West Africa: Implications for Management and Restoration.”
Atanasso Akpovi Justin, Université d’Abomey-Calavi , Benin
”Enhancing the Fire Resistance of Cement-bonded Particleboard made of Scots Pine and Poplar”
Tibor L. Alpár, University of Sopron, Hungary
”Promotion of Eucalyptus Hybrid Species as Utility Poles for Electricity Transmission: The Mechanical Strength Properties of Eucalyptus urograndis Grown in Ghana”
Emmanuel Appiah-Kubi, University of Education, Winneba, Ghana
”Increasing Cold Tack of pMDI resin with Partial Soy Flour Substitution”
Osei Asafu-Adjaye, Auburn University, United States
”Adhesive Bonding of Planed and Sawn Jointed Sugar Maple Lumber: Bending Strength of Glued Joints”
Mohammadali Azadfar, State University of New York, United States
”The Influence of Oil Uptake on Moisture Excluding Efficiency in Thermally Treated Wood”
Jan Baar, Mendel University in Brno, Czech Republic
”Non-linear Material Model of Mechanical Behaviour of Oak Wood Exposed to Different Relative Humidity Conditions”
Martin Brabec, Mendel University in Brno, Czech Republic
”Development of Technology for One-sided Surface Carbonization of Wood”
Petr Cermak, Mendel University in Brno, Czech Republic
”Surface Free Energy of Ten Tropical Wood Species and their Acrylic and Alkyd Varnishes Wettability”
Wayan Darmawan, Bogor Agricultural University (IPB), Indonesia
”Bond Strength of Wood Adhesives: The Sensitivity of Standard Test Methods to Imperfections”
Mohammad Derikvand, Aalto University, Finland
”Experimental Analysis of Mass Loss Kinetics during Heat Treatment of Wood”
Jakub Dömény, Mendel University in Brno, Czech Republic
”Smart Thumper™, a Non Destructive Lumber Evaluation Phone Application”
Frederico José Nistal França, Mississippi State University, United States
”Building a Portable Offline Bark Identification System through Training a MobileNet-V2 by Knowledge Distilling and Network Pruning”
Rado Gazo, FNR, Purdue University, United States
”Assessing Success of Sustainability Curriculum Development Efforts: Evidence from
a U.S. Higher Education Institution”
Rado Gazo, FNR, Purdue University, United States
”Circular Economy Principles for Furniture Industry”
Eva Haviarova, FNR, Purdue University, United States
”Natural Insulating Material in the Form of Burning”
Michaela Horváthová M, University of Zilina, Slovakia
“Dynamic Properties of Traditional Timber Building”
Gi Young Jeong, Chonnam National University, South Korea
”Cellulose Nanofiber Effect on Bonding Strength of PUR and PVAc Glued Wood Joint in Shear Loading”
Gourav Kamboj, Czech University of Life Science, Czech Republic
”Digital Solutions in Architecture and Timber Construction”
Manja Kitek Kuzman, University of Ljubljana, Slovenia
”Investigations of the Strength and Resistance of Glued Pine Wood from Tuchola Region”
Tomasz Krystofiak, Poznań University of Life Sciences, Poland
”Variations of Earlywood Vessel Diameter of Quercus petraea Liebl According to Tree Size and Altitude”
Jean-Michel Leban, INRA, France
”Comparative Study on Moso Bamboo Shear Strength in Four Test Methods”
Huanrong Liu, International Center for Bamboo and Rattan, China
”Development of Palm Oil-based Resins for Natural Fiber Composites”
Wendi Liu, Fujian Agriculture and Forestry University, China
”Anatomical Features and Growth Ring Width Correlation of Catalpa bungei”
Yamei Liu, Anhui Agricultural University, China
”Structural Reliability Analysis of Cross Laminated Timber Plates Submitted to Bending Test”
Nilson Mascia, State University of Campinas, Brazil
”Physical Properties of Particleboard Produced from Residues of Musa paradisiaca pseudostem, Theobroma cacao and Ceiba pentandra”
Prosper Mensah, CSIR-Forestry Research Institute of Ghana, Ghana
”Characterization of Particleboard Produced from Residues of Musa paradisiaca pseudostem, Theobroma Cacao Pod, Theobroma Cacao Stem and Ceiba Pentandra”
Stephen Mitchual, University of Education, Winneba, Ghana
”Global CLT Industry in 2020: Growth Beyond the Alpine Region”
Lech Muszynski, Oregon State University, United States
”How Megaplatypus mutatus Behaves inside a Trunk? Studying its Galleries via Computerized Axial Tomography and Digital Images Processing”
Esteban Ceriani Nakamurakare, CONICET – National University of Lujan, Argentina
”Introducing the SWST Wood Technology Student Chapter at DISAFA, University of Torino, Italy”
Francesco Negro, DISAFA, University of Torino, Italy
”Investigation of the Damping Behaviour of Beech Material”
Gábor Németh, University of Sopron, Hungary
Measuring the Heat of Interaction between Lignocellulosic Materials and Water”
Martin Nopens, Universität Hamburg, Germany
”Combined FTIR Spectroscopy and Rheology for Investigating the Influence of Different Wood Extracts on Adhesive Curing”
Merve Özparpucu, Technical University of Munich, Germany
”Dynamic Behavior of Phenol-formaldehyde Modified Wood under Cyclic Loading”
Jaka Gašper Pečnik, InnoRenew CoE, Slovenia
”The Way of Using Logging Waste in Wood-based Panels Production”
Olena Pinchevska, National University of Life and Environmental Sciences of Ukraine, Ukraine
”Utilization of Juniper Residues for Strandboard Manufacturing”
Tomas Pipiska, Oregon State University, United States
”Surface Modification of Bamboo Fibers for Reinforcing Cement-based Composites”
Renhui Qiu, Fujian Agriculture and Forestry University, China
”Mapping of Moisture on Wood Surface with Hyperspectral Imaging”
Jakub Sandak, InnoRenew CoE & University of Primorska, Slovenia
”Reduction of Phenol Formaldehyde Resin Content in Dry-processed Fibreboards by Adding Hydrolysis Lignin”
Viktor Savov, University of Forestry, Bulgaria
”Life Cycle Assessment of the New InnoRenew CoE Research Building – Hot Spots and the Effects of Methodological Differences on the Results for a Wooden Frame Building”
Erwin M. Schau, InnoRenew CoE, Slovenia
”Adhesives Based on Lignin, Tannin and Liquefied Wood”
Milan Sernek, University of Ljubljana, Slovenia
”Structural Joints of Furniture Made of Cardboard and Plywood”
Alena Sobotkova, Mendel University in Brno, Czech Republic
”Paper and Plastic Waste Composite Boards for Furniture”
Alena Sobotkova, Mendel University in Brno, Czech Republic
”Attracting Children to Wood Science and Renewable Material Professions”
Vesna Starman, InnoRenew CoE, Slovenia
“Effect of Moderate Thermal Treatment on Properties of Resonance Spruce for Piano Soundboard”
Jan Tippner, Mendel University in Brno, Czech Republic
”Effect of Cutting Parameters on Dust Emission and Surface Roughness during Helical Planing Sucupira Wood”
Bruna Ugulino, FPInnovations, Canada
”Effects of Radial Growth Rate on Wood Quality Parameters of Superior Teakwood from Muna Island, Indonesia”
Imam Wahyudi, Bogor Agricultural University (IPB), Indonesia
”Modeling of Thermal Performance of Cellulose Insulation Imbedded with Phase Change Material”
Xun Wang, University of North Texas, United States
”Segmentation of Knot Defects on Coniferous Lumber Surface Using Deep Neural Network”
Hwanmyeong Yeo, Seoul National University, Republic of Korea
”Classification of Heat Treatment Degree of Wood Components Using Near-infrared Spectroscopy”
Hwanmyeong Yeo, Seoul National University, Republic of Korea
”Enhancing Particleboard Panels’ Performance Properties by Nanocellulose and Boric Acid Reinforcement”
Mert Yildirim, Istanbul University – Cerrahpasa, Turkey
”Development of Low Formaldehyde-emitting Furniture Components by Nanocellulose and Boric Acid Reinforcement”
Mert Yildirim, Istanbul University – Cerrahpasa, Turkey
“Improving the Mould and Blue-stain-resistance of Bamboo through Acidic Hydrolysis”
Zixuan Yu, International Center for Bamboo and Rattan, China
”Physical and Mechanical Properties of Flatten Bamboo Panel and Bonding Performance in Different Bonding Suface”
Xiubiao Zhang, International Center for Bamboo and Rattan, China